PartsTable
Technical Data Sheet
Download PDF

7597717 — 7597717

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

7597717: 7597717.

The 7597717 is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, second_end_style: SQUARE, pin_overall_length: 2.500 INCHES NOMINAL IN, pin_overall_diameter: 0.1250 INCHES NOMINAL IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-561-0836, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7597717
NSN: 5315-00-561-0836
NIINs: 005610836, 012283901
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
second_end_styleSQUARE
pin_overall_length2.500 INCHES NOMINAL IN
pin_overall_diameter0.1250 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.063 INCHES NOMINAL IN
end_item_identification4931-00-574-6433
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-00-561-0836
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7597717 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.063 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.1250 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 2.500 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
SECOND END STYLE: SQUARE
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.063 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.1250 INCHES NOMINAL IN
PIN OVERALL LENGTH2.500 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SECOND END STYLESQUARE
END ITEM IDENTIFICATION4931-00-574-6433
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7597717?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7597717?
7597717 is a 7597717. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 7597717?
7597717 is cataloged in the U.S. Government catalog under NSN 5315-00-561-0836. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7597717

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.