PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 75801
75801 ✓ Verified by PartsTable
InLine · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a InLine industrial component. Key specifications include part_name_assigned_by_controlling_agency: WASHER, NUMBER 8,VIBRATION-RESISTANT.. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-230-9258, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75801
NSN: 5330-00-230-9258
FSC: 5330
CAGE: 13074 — MULTI-FLEX SEALS INC (USA)
SPECIFICATIONS
end_item_identification6625-01-560-1265;VIPER TRF-EO TEST STATION, VIRTUAL INSTRUMENT PORTABLE EQUIPMENT REPAIR/TESTER LOGISTICS OPERATIONS CENTER.
part_name_assigned_by_controlling_agencyWASHER, NUMBER 8,VIBRATION-RESISTANT.
NSN5330-00-230-9258
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 75801 MFR: InLine ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER THICKNESS: 0.075 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE CLASS Q PACKING
•
SURFACE TREATMENT: PASSIVATE RETAINER
•
PACKING INSIDE DIAMETER: 0.168 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER THICKNESS0.075 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q PACKING
SURFACE TREATMENTPASSIVATE RETAINER
PACKING INSIDE DIAMETER0.168 INCHES NOMINAL IN
OUTSIDE DIAMETER0.500 INCHES NOMINAL IN
CONSTRUCTIONONE-PIECE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
75801Interchangeable
interchangeable cross-reference
interchangeable
41103Interchangeable
interchangeable cross-reference
interchangeable
4-358861-00Interchangeable
interchangeable cross-reference
interchangeable
2605A004Interchangeable
interchangeable cross-reference
interchangeable
93006H6745Interchangeable
interchangeable cross-reference
interchangeable
7844058P002Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 75801?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75801?
75801 is a CONNECTOR,PLUG,ELECTRICAL manufactured by InLine.
What parts can replace 75801?
There are 7 known substitutes for 75801: 75801, 41103, 4-358861-00 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 75801?
75801 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-230-9258. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75801

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026