758-106-001 — WASHER,SHOULDERED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

758-106-001: WASHER,SHOULDERED.

The WASHER,SHOULDERED is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.077 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN, overall_height: 0.094 INCHES NOMINAL IN, shoulder_height: 0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN, outside_diameter: 0.188 INCHES NOMINAL IN, style_designator: SHOULDERED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-631-9231, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

758-106-001

NSN: 5310-01-631-9231
FSC: 5310 — Nuts and Washers
CAGE: 26055 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV FLUID SYSTEMS DIVISION (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING OVERALL
hole_diameter	0.077 INCHES MINIMUM AND 0.081 INCHES MAXIMUM IN
overall_height	0.094 INCHES NOMINAL IN
shoulder_height	0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
outside_diameter	0.188 INCHES NOMINAL IN
special_features	FLANGE IS CUT AWAY STARTING AT 180 DEGREES OF THE CIRCUMFERNCE AND AT A 45 DEGREE ANGLE FROM EACH SIDE. FABRICATE PER PPS100-171-001
style_designator	SHOULDERED
shoulder_diameter	0.117 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
surface_treatment	PASSIVATE OVERALL
end_item_identification	F-16 AIRCRAFT
material_document_and_classification	PER QQ-5-763,CL 303,CONDITION A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification	PER QQ-P-35,TYPE 1 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
NSN	5310-01-631-9231

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: PER QQ-P-35,TYPE 1 ASSN STD SINGLE TREATMENT RESPONSE OVERALL

•

SHOULDER HEIGHT: 0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: SHOULDERED

•

MATERIAL DOCUMENT AND CLASSIFICATION: PER QQ-5-763,CL 303,CONDITION A ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

OUTSIDE DIAMETER: 0.188 INCHES NOMINAL IN

•

SHOULDER DIAMETER: 0.117 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.094 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	PER QQ-P-35,TYPE 1 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SHOULDER HEIGHT	0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
STYLE DESIGNATOR	SHOULDERED
MATERIAL DOCUMENT AND CLASSIFICATION	PER QQ-5-763,CL 303,CONDITION A ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER	0.188 INCHES NOMINAL IN
SHOULDER DIAMETER	0.117 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
SPECIAL FEATURES	FLANGE IS CUT AWAY STARTING AT 180 DEGREES OF THE CIRCUMFERNCE AND AT A 45 DEGREE ANGLE FROM EACH SIDE. FABRICATE PER PPS100-171-001
SURFACE TREATMENT	PASSIVATE OVERALL
END ITEM IDENTIFICATION	F-16 AIRCRAFT

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 758-106-001?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 758-106-001?

758-106-001 is a WASHER,SHOULDERED.

What is the NSN for 758-106-001?

758-106-001 is cataloged in the U.S. Government catalog under NSN 5310-01-631-9231. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

758-106-001 — WASHER,SHOULDERED

Request a Quote — 758-106-001