PartsTable
Technical Data Sheet
Download PDF

7577416-004 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7577416-004: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, thickness: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN, hole_diameter: 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN, overall_diameter: 0.750 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-126-3665, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7577416-004
NSN: 5310-01-126-3665
FSC: 5310 — Nuts and Washers
CAGE: 7W356 — GENERAL DYNAMICS LAND SYSTEMS INC. DIV GDLS GLOBAL LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
thickness0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
hole_diameter0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
overall_diameter0.750 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-126-3665
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7577416-004 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.750 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 303 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
•
THICKNESS: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.750 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 303 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM IN
THICKNESS0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
SS2-48Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7577416-004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7577416-004?
7577416-004 is a WASHER,FLAT.
What parts can replace 7577416-004?
There is 1 known substitute for 7577416-004: SS2-48. Substitute compatibility should be verified for your specific system.
What is the NSN for 7577416-004?
7577416-004 is cataloged in the U.S. Government catalog under NSN 5310-01-126-3665. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7577416-004

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.