PartsTable
Technical Data Sheet
Download PDF

75759 — 75759

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

75759: 75759.

The 75759 is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, thread_length: 1.667 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN, screw_material: STEEL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-163-4466, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 75759
NSN: 5305-00-163-4466
NIINs: 001634466, 010595848
FSC: 5305 — Screws
CAGE: 93835 — PARKER HANNIFIN CORPORATION DIV HYDRAULIC SYSTEMS DIVISION (USA)
SPECIFICATIONS
head_styleROUND
head_height0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.334 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
thread_length1.667 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length1.750 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
screw_surface_treatmentCADMIUM
thread_quantity_per_inch24
NSN5305-00-163-4466
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 75759 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 1.750 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.667 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.123 INCHES MINIMUM AND 0.137 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH1.750 INCHES MAXIMUM IN
THREAD LENGTH1.667 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
10125026Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 75759?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75759?
75759 is a 75759. It is classified as a MRO (MRO_GENERAL).
What parts can replace 75759?
There is 1 known substitute for 75759: 10125026. Substitute compatibility should be verified for your specific system.
What is the NSN for 75759?
75759 is cataloged in the U.S. Government catalog under NSN 5305-00-163-4466. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75759

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.