PartsTable
Technical Data Sheet
Download PDF

757169 — SHAFT,STRAIGHT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

757169: SHAFT,STRAIGHT.

The SHAFT,STRAIGHT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 OVERALL, thread_class: 2B, thread_length: 0.200 INCHES NOMINAL IN, first_end_style: SLOTTED, second_end_style: SQUARE, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-076-4971, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
757169
NSN: 5331-01-076-4971
NIINs: 010764971, 012412569, 014330925
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 1018 OVERALL
thread_class2B
thread_length0.200 INCHES NOMINAL IN
first_end_styleSLOTTED
second_end_styleSQUARE
thread_directionRIGHT-HAND
first_end_locationSLOT END
nominal_thread_size0.312 INCHES IN
first_end_slot_depth0.050 INCHES NOMINAL IN
first_end_slot_width0.060 INCHES NOMINAL IN
thread_series_designatorUNF
material_document_and_classificationASTMA29 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5331-01-076-4971
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 757169 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.420 INCHES MINIMUM AND 2.466 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 2.227 INCHES MINIMUM AND 2.247 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
TECHNICAL CHARACTERISTICS
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.420 INCHES MINIMUM AND 2.466 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER2.227 INCHES MINIMUM AND 2.247 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
SUBSTITUTES & CROSS-REFERENCES 4
0223852 ITEM 36Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-140E515-80Reference document
Same NSN cross-reference
Reference document — Secondary reference
ARP568-140MILG2 2050Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2-140E688-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 757169?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 757169?
757169 is a SHAFT,STRAIGHT.
What parts can replace 757169?
There are 4 known substitutes for 757169: 0223852 ITEM 36, 2-140E515-80, ARP568-140MILG2 2050 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 757169?
757169 is cataloged in the U.S. Government catalog under NSN 5331-01-076-4971. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 757169

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.