PartsTable
Technical Data Sheet
Download PDF

757168 — 757168

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

757168: 757168.

The 757168 is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303, outside_diameter: 1.000 INCHES NOMINAL IN, style_designator: SKIRTED/ROUND WITH CONCAVE TOP, attachment_method: STUD, overall_thickness: 1.500 INCHES NOMINAL IN, nominal_thread_size: 0.250 INCHES STUD IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-455-7025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
757168
NSN: 5331-00-455-7025
NIINs: 004557025, 012244678
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 303
outside_diameter1.000 INCHES NOMINAL IN
style_designatorSKIRTED/ROUND WITH CONCAVE TOP
attachment_methodSTUD
overall_thickness1.500 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES STUD IN
material_transparencyCLEAR
thread_quantity_per_inch28 STUD
thread_series_designatorUNF STUD
gripping_surface_conditionGRIP AID
NSN5331-00-455-7025
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 757168 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.943 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.727 INCHES MINIMUM AND 1.747 INCHES MAXIMUM IN
•
MATERIAL: RUBBER POLYISOPRENE NATURAL CLASS NR OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.943 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.727 INCHES MINIMUM AND 1.747 INCHES MAXIMUM IN
MATERIALRUBBER POLYISOPRENE NATURAL CLASS NR OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
SUBSTITUTES & CROSS-REFERENCES 8
J120Reference document
Same NSN cross-reference
Reference document — Secondary reference
7912037Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS568-132Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
2-132E515-8Reference document
Same NSN cross-reference
Reference document — Secondary reference
PRP132-3238Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
D2000M2AA810A13EA14F17Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 757168?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 757168?
757168 is a 757168.
What parts can replace 757168?
There are 8 known substitutes for 757168: J120, 7912037, AS568-132 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 757168?
757168 is cataloged in the U.S. Government catalog under NSN 5331-00-455-7025. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 757168