PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 755675
755675 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, overall_height: 0.4375 INCHES NOMINAL IN, groove_diameter: 0.15625 INCHES NOMINAL IN, style_designator: DOUBLE FLANGE, top_flange_width: 0.0625 INCHES NOMINAL IN, bottom_flange_width: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-454-2897, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
755675
NSN: 5340-00-454-2897
FSC: 5340
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
materialRUBBER
overall_height0.4375 INCHES NOMINAL IN
groove_diameter0.15625 INCHES NOMINAL IN
style_designatorDOUBLE FLANGE
top_flange_width0.0625 INCHES NOMINAL IN
bottom_flange_width0.250 INCHES NOMINAL IN
bottom_flange_diameter0.375 INCHES NOMINAL IN
outside/top_flange_diameter0.28125 INCHES NOMINAL IN
material_document_and_classificationMIL-STD-417, TYPE R, CLASS RS, GRADE RS615ABFG MIL STD SINGLE MATERIAL RESPONSE
NSN5340-00-454-2897
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 755675 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOTTOM FLANGE DIAMETER: 0.375 INCHES NOMINAL IN
•
OUTSIDE/TOP FLANGE DIAMETER: 0.28125 INCHES NOMINAL IN
•
BOTTOM FLANGE WIDTH: 0.250 INCHES NOMINAL IN
•
GROOVE DIAMETER: 0.15625 INCHES NOMINAL IN
•
TOP FLANGE WIDTH: 0.0625 INCHES NOMINAL IN
•
MATERIAL: RUBBER
•
STYLE DESIGNATOR: DOUBLE FLANGE
TECHNICAL CHARACTERISTICS (FLIS)
BOTTOM FLANGE DIAMETER0.375 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.28125 INCHES NOMINAL IN
BOTTOM FLANGE WIDTH0.250 INCHES NOMINAL IN
OVERALL HEIGHT0.4375 INCHES NOMINAL IN
GROOVE DIAMETER0.15625 INCHES NOMINAL IN
TOP FLANGE WIDTH0.0625 INCHES NOMINAL IN
MATERIALRUBBER
STYLE DESIGNATORDOUBLE FLANGE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-STD-417, TYPE R, CLASS RS, GRADE RS615ABFG MIL STD SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
10-006-2Interchangeable
interchangeable cross-reference
interchangeable
MN129Interchangeable
interchangeable cross-reference
interchangeable
7100614Interchangeable
interchangeable cross-reference
interchangeable
BR10-450Interchangeable
interchangeable cross-reference
interchangeable
TC72Interchangeable
interchangeable cross-reference
interchangeable
C055Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 755675?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 755675?
755675 is a BUMPER.
What parts can replace 755675?
There are 15 known substitutes for 755675: 10-006-2, MN129, 7100614 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 755675?
755675 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-454-2897. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 755675

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026