PartsTable
Technical Data Sheet
Download PDF

7556672 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7556672: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL SHANK, end_radius: 0.370 INCHES NOMINAL IN, fork_depth: 2.000 INCHES NOMINAL IN, hole_shape: ROUND, hole_diameter: 0.453 INCHES NOMINAL IN, overall_width: 1.562 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-500-6874, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7556672
NSN: 5340-01-500-6874
FSC: 5340 — Hardware, Commercial
CAGE: 5QE71 — RHINESTAHL CORPORATION DBA RHINESTAHL (USA)
SPECIFICATIONS
materialSTEEL SHANK
end_radius0.370 INCHES NOMINAL IN
fork_depth2.000 INCHES NOMINAL IN
hole_shapeROUND
hole_diameter0.453 INCHES NOMINAL IN
overall_width1.562 INCHES NOMINAL IN
fork_span_width1.000 INCHES NOMINAL IN
overall_diameter0.500 INCHES NOMINAL IN
special_featuresCONTROLLING AGENCY PART NAME IS "FITTING, JAW END"
style_designatorCLEVIS
surface_treatmentCADMIUM OVERALL
fork_arm_thickness0.281 INCHES NOMINAL IN
NSN5340-01-500-6874
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7556672 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 1.000 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.281 INCHES NOMINAL IN
•
OVERALL DIAMETER: 0.500 INCHES NOMINAL IN
•
END RADIUS: 0.370 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4130 NATIONAL SPEC 1ST MATERIAL RESPONSE LATCH RING
•
NOMINAL THREAD SIZE: 0.500 INCHES SHANK IN
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH1.000 INCHES NOMINAL IN
FORK ARM THICKNESS0.281 INCHES NOMINAL IN
OVERALL DIAMETER0.500 INCHES NOMINAL IN
END RADIUS0.370 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4130 NATIONAL SPEC 1ST MATERIAL RESPONSE LATCH RING
OVERALL WIDTH1.562 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.500 INCHES SHANK IN
HOLE SHAPEROUND
SPECIAL FEATURESCONTROLLING AGENCY PART NAME IS "FITTING, JAW END"
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1C6886P07Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7556672?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7556672?
7556672 is a CLEVIS,ROD END.
What parts can replace 7556672?
There is 1 known substitute for 7556672: 1C6886P07. Substitute compatibility should be verified for your specific system.
What is the NSN for 7556672?
7556672 is cataloged in the U.S. Government catalog under NSN 5340-01-500-6874. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7556672

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.