PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 75513000A
75513000A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUTTON,PLUG is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON, head_height: 0.062 INCHES NOMINAL IN, overall_height: 0.406 INCHES NOMINAL IN, special_features: HAS TWO PRY SLOTS, head_outside_diameter: 0.797 INCHES NOMINAL IN, hole_accommodation_diameter: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-268-6972, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75513000A
NSN: 5340-01-268-6972
FSC: 5340
CAGE: 04901 — BOONTON ELECTRONICS CORPORATION DIV BOONTON ELECTRONICS (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON
head_height0.062 INCHES NOMINAL IN
overall_height0.406 INCHES NOMINAL IN
special_featuresHAS TWO PRY SLOTS
head_outside_diameter0.797 INCHES NOMINAL IN
hole_accommodation_diameter0.625 INCHES NOMINAL IN
NSN5340-01-268-6972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 75513000A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
•
HOLE ACCOMMODATION DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON
•
HEAD OUTSIDE DIAMETER: 0.797 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESHAS TWO PRY SLOTS
HEAD HEIGHT0.062 INCHES NOMINAL IN
OVERALL HEIGHT0.406 INCHES NOMINAL IN
HOLE ACCOMMODATION DIAMETER0.625 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON
HEAD OUTSIDE DIAMETER0.797 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
3071Upgraded Successor
successor cross-reference
successor
5213Interchangeable
interchangeable cross-reference
interchangeable
J246Interchangeable
interchangeable cross-reference
interchangeable
AC294Interchangeable
interchangeable cross-reference
interchangeable
CFN70312Interchangeable
interchangeable cross-reference
interchangeable
NAS295M4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 75513000A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75513000A?
75513000A is a BUTTON,PLUG.
What parts can replace 75513000A?
There are 18 known substitutes for 75513000A: 3071, 5213, J246 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 75513000A?
75513000A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-268-6972. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75513000A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026