PartsTable
Technical Data Sheet
Download PDF

7550805-8 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7550805-8: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1108 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT COUNTERSUNK, nut_length: 0.015 INCHES NOMINAL IN, nut_diameter: 0.413 INCHES NOMINAL IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-136-7452, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7550805-8
NSN: 5310-01-136-7452
FSC: 5310 — Nuts and Washers
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialSTEEL COMP 1108 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT COUNTERSUNK
nut_length0.015 INCHES NOMINAL IN
nut_diameter0.413 INCHES NOMINAL IN
thread_class3B
head_diameter0.656 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
shank_end_typeOPEN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.3125 INCHES IN
NSN5310-01-136-7452
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7550805-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 0.015 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
HEAD COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SHANK END TYPE: OPEN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.3125 INCHES IN
TECHNICAL CHARACTERISTICS
NUT LENGTH0.015 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
HEAD COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK END TYPEOPEN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.3125 INCHES IN
NUT DIAMETER0.413 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7550805-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7550805-8?
7550805-8 is a NUT,PLAIN,BLIND RIVET.
What is the NSN for 7550805-8?
7550805-8 is cataloged in the U.S. Government catalog under NSN 5310-01-136-7452. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7550805-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.