PartsTable
Technical Data Sheet
Download PDF

755-16 — CONNECTOR,RECEPTACLE,ELECTRICAL

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

755-16: CONNECTOR,RECEPTACLE,ELECTRICAL.

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include end_item_name: TOWING TRACTOR, end_item_source: 10695, end_item_identification: MODEL SM340-F-A9, nonsupply_items_and_quantities: BRAKE SHOE AND LINING 4. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-186-3416, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
755-16
NSN: 5340-00-186-3416
NIINs: 001863416, 007972402, 009397726, 012749293, 015900758
FSC: 5340 — Hardware, Commercial
CAGE: 83930 — TRANSDIGM INC DBA ADEL WIGGINS GROUP DIV ADEL WIGGINS (USA)
SPECIFICATIONS
end_item_nameTOWING TRACTOR
end_item_source10695
component_quantity4
end_item_identificationMODEL SM340-F-A9
nonsupply_items_and_quantitiesBRAKE SHOE AND LINING 4
NSN5340-00-186-3416
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 755-16 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.126 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.908 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.126 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.908 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 2024 BAND
LOOP INSIDE DIAMETER1.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
SS7562A100Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-DTL-8603Reference document
Same NSN cross-reference
Reference document — Identification reference
AN742D16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MIL-C-8603Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340PL0727542Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 755-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 755-16?
755-16 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Hama.
What parts can replace 755-16?
There are 5 known substitutes for 755-16: SS7562A100, MIL-DTL-8603, AN742D16 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 755-16?
755-16 is cataloged in the U.S. Government catalog under NSN 5340-00-186-3416. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 755-16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.