PartsTable
Technical Data Sheet
Download PDF

754PSC — RESISTOR,VARIABLE,NONWIRE WOUND,

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

754PSC: RESISTOR,VARIABLE,NONWIRE WOUND,.

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.050 INCHES MAXIMUM IN, shaft_style: ROUND, pilot_length: 0.0670 INCHES MAXIMUM IN, shaft_length: 0.750 INCHES NOMINAL IN, shaft_runout: 0.001 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-863-5590, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 754PSC
NSN: 5905-00-863-5590
FSC: 5905 — Resistor
CAGE: 12205 — BUNKER RAMO CORP AMPHENOL CONTROLS DIV (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.050 INCHES MAXIMUM IN
shaft_styleROUND
pilot_length0.0670 INCHES MAXIMUM IN
shaft_length0.750 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter2.005 INCHES MAXIMUM IN
lateral_runout0.002 INCHES IN
pilot_diameter1.8750 INCHES MAXIMUM IN
shaft_diameter0.250 INCHES MAXIMUM IN
undercut_width0.0550 INCHES MINIMUM IN
NSN5905-00-863-5590
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN 754PSC MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 1.00 INCH-OUNCES IN
•
BODY DIAMETER: 2.005 INCHES MAXIMUM IN
•
LATERAL RUNOUT: 0.002 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 500.0 OHMS SINGLE SECTION
•
MOUNTING LIP DEPTH: 0.0550 INCHES MINIMUM IN
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION
•
UNDERCUT WIDTH: 0.0550 INCHES MINIMUM IN
•
SECTION QUANTITY: 1
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE1.00 INCH-OUNCES IN
BODY DIAMETER2.005 INCHES MAXIMUM IN
LATERAL RUNOUT0.002 INCHES IN
ELECTRICAL RESISTANCE PER SECTION500.0 OHMS SINGLE SECTION
MOUNTING LIP DEPTH0.0550 INCHES MINIMUM IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
UNDERCUT WIDTH0.0550 INCHES MINIMUM IN
SECTION QUANTITY1
SHAFT DIAMETER0.250 INCHES MAXIMUM IN
UNDERCUT DIAMETER1.870 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059
SUBSTITUTES & CROSS-REFERENCES 4
10545439Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
5905008635590Reference document
Same NSN cross-reference
Reference document — Informative reference only
200FL1-149Reference document
Same NSN cross-reference
Reference document — Secondary reference
754-6329Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 754PSC?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 754PSC?
754PSC is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 754PSC?
There are 4 known substitutes for 754PSC: 10545439, 5905008635590, 200FL1-149 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 754PSC?
754PSC is cataloged in the U.S. Government catalog under NSN 5905-00-863-5590. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 754PSC