PartsTable
Technical Data Sheet
Download PDF

7544852 — BEARING,ROLLER,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

7544852: BEARING,ROLLER,THRUST.

The BEARING,ROLLER,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL WASHER, bore_diameter: 1.5000 INCHES NOMINAL IN, alignment_type: RIGID, overall_height: 0.8125 INCHES NOMINAL IN, surface_finish: GROUND, style_designator: FLAT RACE SURFACE, CYLINDRICAL ROLLERS. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-198-1601, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7544852
NSN: 3110-00-198-1601
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 18877 — WATERTOWN ARSENAL SMIWT-RE (USA)
SPECIFICATIONS
materialSTEEL WASHER
bore_diameter1.5000 INCHES NOMINAL IN
alignment_typeRIGID
overall_height0.8125 INCHES NOMINAL IN
surface_finishGROUND
style_designatorFLAT RACE SURFACE, CYLINDRICAL ROLLERS
overall_outside_diameter3.0000 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
thrust_directional_capability_designationSINGLE
NSN3110-00-198-1601
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7544852 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: FLAT RACE SURFACE, CYLINDRICAL ROLLERS
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 3.0000 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.8125 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORFLAT RACE SURFACE, CYLINDRICAL ROLLERS
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER3.0000 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
BORE DIAMETER1.5000 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OR STEEL RETAINER
MATERIALSTEEL WASHER
SUBSTITUTES & CROSS-REFERENCES 2
T09Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS17103-5Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7544852?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7544852?
7544852 is a BEARING,ROLLER,THRUST.
What parts can replace 7544852?
There are 2 known substitutes for 7544852: T09, MS17103-5. Substitute compatibility should be verified for your specific system.
What is the NSN for 7544852?
7544852 is cataloged in the U.S. Government catalog under NSN 3110-00-198-1601. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7544852