PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7541123

7541123 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL, body_style: WAVEGUIDE TYPE, body_width: 0.938 INCHES NOMINAL IN, point_type: CONVENTIONAL, shaft_type: ROUND, FLATTED, body_height: 0.922 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-156-1879, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7541123
NSN: 3110-00-156-1879
FSC: 3110
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialSTEEL
body_styleWAVEGUIDE TYPE
body_width0.938 INCHES NOMINAL IN
point_typeCONVENTIONAL
shaft_typeROUND, FLATTED
body_height0.922 INCHES NOMINAL IN
body_length1.000 INCHES NOMINAL IN
design_typeEXPANDING
flat_height0.219 INCHES NOMINAL IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
NSN3110-00-156-1879
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7541123 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
M850InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LENS,M8.50SPH,0.50BC,71MM DIAInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
9NBC1419YZPMILG3278AInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
9NCB1419YZPANG25InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
9NBC1419YZPInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
163B5559InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7541123?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7541123?
7541123 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.
What parts can replace 7541123?
There are 30 known substitutes for 7541123: M850, LENS,M8.50SPH,0.50BC,71MM DIA, 9NBC1419YZPMILG3278A and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7541123?
7541123 is cataloged in the Federal Logistics Information System under NSN 3110-00-156-1879. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7541123

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026