PartsTable
Technical Data Sheet
Download PDF

754-6-2-8HT — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

754-6-2-8HT: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ANODIZE BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-514-3010, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
754-6-2-8HT
NSN: 5340-00-514-3010
FSC: 5340 — Hardware, Commercial
CAGE: 81982 — HYDRO-AIRE AEROSPACE CORP (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentANODIZE BAND
material_thickness0.0320 INCHES NOMINAL IN
loop_inside_diameter0.375 INCHES NOMINAL IN
cushioning_environmental_protectionHEAT
material_document_and_classificationQQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.780 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.592 INCHES NOMINAL IN
NSN5340-00-514-3010
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 754-6-2-8HT MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
STYLE DESIGNATOR: OFFSET MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.0320 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.780 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE BAND
TECHNICAL CHARACTERISTICS
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
STYLE DESIGNATOROFFSET MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.0320 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.780 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.592 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
MS21919DH6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 754-6-2-8HT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 754-6-2-8HT?
754-6-2-8HT is a CLAMP,LOOP.
What parts can replace 754-6-2-8HT?
There is 1 known substitute for 754-6-2-8HT: MS21919DH6. Substitute compatibility should be verified for your specific system.
What is the NSN for 754-6-2-8HT?
754-6-2-8HT is cataloged in the U.S. Government catalog under NSN 5340-00-514-3010. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 754-6-2-8HT

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.