PartsTable
Technical Data Sheet
Download PDF

754-2-25284 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

754-2-25284: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: ROUND, nut_diameter: 0.743 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-452-4026, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
754-2-25284
NSN: 5310-00-452-4026
FSC: 5310 — Nuts and Washers
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleROUND
nut_diameter0.743 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
thread_seriesUNF
special_featuresTHREE SCALLOPS EQUALLY SPACED ON ONE SIDE
thread_directionRIGHT-HAND
drive_point_depth0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
drive_point_width0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
nominal_thread_size0.438 INCHES IN
NSN5310-00-452-4026
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 754-2-25284 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
DRIVE POINT WIDTH: 0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.438 INCHES IN
•
NUT DIAMETER: 0.743 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNF
DRIVE POINT WIDTH0.125 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.438 INCHES IN
NUT DIAMETER0.743 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
NUT THICKNESS0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM IN
SPECIAL FEATURESTHREE SCALLOPS EQUALLY SPACED ON ONE SIDE
SURFACE TREATMENTCADMIUM OVERALL
DRIVE POINT QUANTITY6
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 754-2-25284?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 754-2-25284?
754-2-25284 is a NUT,PLAIN,ROUND.
What is the NSN for 754-2-25284?
754-2-25284 is cataloged in the U.S. Government catalog under NSN 5310-00-452-4026. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 754-2-25284