7539802 — SHAFT DRIVE

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

7539802: SHAFT DRIVE.

The SHAFT DRIVE is a the manufacturer industrial component. Key specifications include end_item_identification: 2520-00-753-9802. This part is cataloged in the U.S.

Government catalog under NSN 2520-00-753-9802, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7539802

NSN: 2520-00-753-9802
FSC: 2520 — Vehicular Power Transmission Components
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

end_item_identification	2520-00-753-9802
NSN	2520-00-753-9802

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL 50D-146F OR 4.500 DIA TIMES5 SAE,4620ST WGT 3.0 OR AISI 94B17 OR SAE 8620,4.687 IN. L,END OF SHAFT 1.3779 IN. DIA W FOR 0.729 IN. L,1.625IN. DIA W FOR 0.093 IN. L,4.450 IN. DIA W FOR 0.500 IN. L,CENTER 0.872 IN.DIA L,WITH 34 TEETH,DIA PITCH 8-10,PRESSURE ANGLE 20 DEGREES,PITCH DIA 4.250,OUTSIDE DIA 4.450,BACKLASH 0.006M 0.010 WITH MATE,CIRCULAR TOOTH THICK0.1933 M 0.0020,DIM OVER 2 0.216 DIA,PINS 4.5445 M 0.0049,CROWN SHAVE 0.0025 MAX,1.250 IN. DIA W FOR 0.906 IN. L IN CONTINUE OF SHAFT,1.093 IN. SPLINE STRAIGHT,0.437 IN. L WITH OUTSIDE DIA OF 0.586 WITH 32 THREADS PER INCH,CASE HARDEN TEETH TO DEPTH OF0.025 TO 0.035 ROCKWELL C 60 MIN,GROUND DIAS TO BE CONCENTRIC WITHIN 0.0005 TOTAL INDICATOR READING,10 SPLINE-CLASS PERMANET FIT,CENTERS TO REMAIN IN ENDS OF SHAFT,SHAFT HARDNESSTO BE ROCKWELL C 20-27 IN

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION

STEEL 50D-146F OR 4.500 DIA TIMES5 SAE,4620ST WGT 3.0 OR AISI 94B17 OR SAE 8620,4.687 IN. L,END OF SHAFT 1.3779 IN. DIA W FOR 0.729 IN. L,1.625IN. DIA W FOR 0.093 IN. L,4.450 IN. DIA W FOR 0.500 IN. L,CENTER 0.872 IN.DIA L,WITH 34 TEETH,DIA PITCH 8-10,PRESSURE ANGLE 20 DEGREES,PITCH DIA 4.250,OUTSIDE DIA 4.450,BACKLASH 0.006M 0.010 WITH MATE,CIRCULAR TOOTH THICK0.1933 M 0.0020,DIM OVER 2 0.216 DIA,PINS 4.5445 M 0.0049,CROWN SHAVE 0.0025 MAX,1.250 IN. DIA W FOR 0.906 IN. L IN CONTINUE OF SHAFT,1.093 IN. SPLINE STRAIGHT,0.437 IN. L WITH OUTSIDE DIA OF 0.586 WITH 32 THREADS PER INCH,CASE HARDEN TEETH TO DEPTH OF0.025 TO 0.035 ROCKWELL C 60 MIN,GROUND DIAS TO BE CONCENTRIC WITHIN 0.0005 TOTAL INDICATOR READING,10 SPLINE-CLASS PERMANET FIT,CENTERS TO REMAIN IN ENDS OF SHAFT,SHAFT HARDNESSTO BE ROCKWELL C 20-27 IN

END ITEM IDENTIFICATION

2520-00-753-9802

OTHER ITEMS IN FSC 2520 — Vehicular Power Transmission Components

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

2520-00-000-3976 2520-00-000-8852 2520-00-000-9292 2520-00-001-0011 2520-00-001-3397 2520-00-001-3425 2520-00-001-3440 2520-00-001-3441

SUBSTITUTES & CROSS-REFERENCES 1

50D146Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 7539802?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7539802?

7539802 is a SHAFT DRIVE.

What parts can replace 7539802?

There is 1 known substitute for 7539802: 50D146. Substitute compatibility should be verified for your specific system.

What is the NSN for 7539802?

7539802 is cataloged in the U.S. Government catalog under NSN 2520-00-753-9802. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7539802 — SHAFT DRIVE

Request a Quote — 7539802