PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7536-1
7536-1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, head_style: HEXAGON, design_type: WHIP SINGLE ANTENNA ELEMENT, head_height: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, thread_class: 2A A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-450-7956, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7536-1
NSN: 5305-00-450-7956
FSC: 5305
CAGE: 23905 — L-3 COMMUNICATIONS WESTWOOD CORPORATION DBA EDI DIVISION DIV TANO DIVISION (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
head_styleHEXAGON
design_typeWHIP SINGLE ANTENNA ELEMENT
head_height0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
thread_class2A A
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.3125 INCHES NOMINAL IN
seal_quantity2
thread_length0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
load_directionRADIAL
overall_height4.333 FEET NOMINAL FT
NSN5305-00-450-7956
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 7536-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: HEXAGON
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEHEXAGON
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
FASTENER LENGTH0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD LENGTH0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLESLOT
THREAD QUANTITY PER INCH32
THREAD CLASS2A A
HEAD HEIGHT0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
120-2Interchangeable
interchangeable cross-reference
interchangeable
75361Interchangeable
interchangeable cross-reference
interchangeable
5116-000-0006Interchangeable
interchangeable cross-reference
interchangeable
12265597-1Interchangeable
interchangeable cross-reference
interchangeable
Z99R8Interchangeable
interchangeable cross-reference
interchangeable
Z99R8XR1CJInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7536-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7536-1?
7536-1 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 7536-1?
There are 6 known substitutes for 7536-1: 120-2, 75361, 5116-000-0006 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7536-1?
7536-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-450-7956. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7536-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026