PartsTable
Technical Data Sheet
Download PDF

753553 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

753553: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.620 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, length: 1.000 INCHES NOMINAL IN, hole_diameter: 0.281 INCHES NOMINAL IN, loop_opening_width: 0.078 INCHES NOMINAL IN, material_thickness: 0.041 INCHES NOMINAL IN, loop/holding_dimension: 0.219 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-447-3443, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
753553
NSN: 5340-00-447-3443
FSC: 5340 — Hardware, Commercial
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
width0.620 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
length1.000 INCHES NOMINAL IN
hole_diameter0.281 INCHES NOMINAL IN
loop_opening_width0.078 INCHES NOMINAL IN
material_thickness0.041 INCHES NOMINAL IN
loop/holding_dimension0.219 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-447-3443
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 753553 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.219 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.041 INCHES NOMINAL IN
•
LOOP OPENING WIDTH: 0.078 INCHES NOMINAL IN
•
WIDTH: 0.620 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH1.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.219 INCHES NOMINAL IN
MATERIAL THICKNESS0.041 INCHES NOMINAL IN
LOOP OPENING WIDTH0.078 INCHES NOMINAL IN
WIDTH0.620 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
HOLE DIAMETER0.281 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 753553?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 753553?
753553 is a CLIP,SPRING TENSION.
What is the NSN for 753553?
753553 is cataloged in the U.S. Government catalog under NSN 5340-00-447-3443. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 753553

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.