PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 75336A01
75336A01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.375 INCHES NOMINAL IN, overall_length: 0.733 INCHES NOMINAL IN, style_designator: CURVED ARCH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-046-4273, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75336A01
NSN: 5340-01-046-4273
FSC: 5340
CAGE: 73760 — ITT AEROSPACE CONTROLS LLC DBA ITT AEROSPACE CONTROLS UNIT S (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.375 INCHES NOMINAL IN
overall_length0.733 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentCADMIUM AND DICHROMATE
material_thickness0.030 INCHES NOMINAL IN
mounting_hole_size0.150 INCHES NOMINAL IN
inside_diameter/arch_length0.250 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.219 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole0.375 INCHES NOMINAL IN
NSN5340-01-046-4273
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 75336A01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.150 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
CUSHION: NOT INCLUDED
•
STYLE DESIGNATOR: CURVED ARCH
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
SURFACE TREATMENT: CADMIUM AND DICHROMATE
•
MATERIAL THICKNESS: 0.030 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE SIZE0.150 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
CUSHIONNOT INCLUDED
STYLE DESIGNATORCURVED ARCH
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
SURFACE TREATMENTCADMIUM AND DICHROMATE
OVERALL LENGTH0.733 INCHES NOMINAL IN
MATERIAL THICKNESS0.030 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.219 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
100742Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
interchangeable cross-reference
interchangeable
XX002-0529Interchangeable
interchangeable cross-reference
interchangeable
MS15975-208Interchangeable
interchangeable cross-reference
interchangeable
TIP00021Interchangeable
interchangeable cross-reference
interchangeable
G4284Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 75336A01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75336A01?
75336A01 is a STRAP,RETAINING.
What parts can replace 75336A01?
There are 9 known substitutes for 75336A01: 100742, FFS92, XX002-0529 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 75336A01?
75336A01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-046-4273. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75336A01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026