PartsTable
Technical Data Sheet
PartsTable / MRO / 753-005
753-005 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The FILTER,BAND PASS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, body_width: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN, body_height: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, body_length: 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN, body_material: METAL, inclosure_type: HERMETICALLY SEALED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-119-6407, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 753-005
NSN: 5315-01-119-6407
FSC: 5315
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
body_width0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
body_height0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
body_length1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM IN
body_materialMETAL
inclosure_typeHERMETICALLY SEALED
overall_height0.875 INCHES NOMINAL IN
first_end_styleCHAMFERED
second_end_styleCHAMFERED
style_designatorRECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
surface_treatmentPASSIVATE OVERALL
pin_overall_length1.250 INCHES NOMINAL IN
NSN5315-01-119-6407
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 753-005 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 1.250 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
SECOND END TAPER ANGLE: 8.0 DEGREES NOMINAL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
MATERIAL: STEEL COMP 303 OVERALL
•
PIN OVERALL DIAMETER: 0.3750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER LENGTH0.030 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
PIN OVERALL LENGTH1.250 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
SECOND END TAPER ANGLE8.0 DEGREES NOMINAL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
MATERIALSTEEL COMP 303 OVERALL
PIN OVERALL DIAMETER0.3750 INCHES NOMINAL IN
SECOND END STYLECHAMFERED
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
FA-2976Interchangeable
interchangeable cross-reference
interchangeable
6975Interchangeable
interchangeable cross-reference
interchangeable
A3060816-005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 753-005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 753-005?
753-005 is a FILTER,BAND PASS. It is classified as a MRO (MRO_GENERAL).
What parts can replace 753-005?
There are 3 known substitutes for 753-005: FA-2976, 6975, A3060816-005. Substitute compatibility should be verified for your specific system.
What is the NSN for 753-005?
753-005 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-119-6407. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 753-005

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026