PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7529133
7529133 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: RUBBER CUSHION, overall_width: 1.000 INCHES NOMINAL IN, style_designator: SINGLE LOOP, loop_inside_diameter: 0.375 INCHES NOMINAL IN, distance_from_loop_center_to_tongue_end: 1.374 INCHES NOMINAL IN, center_to_center_distance_between_loop_and_mounting_hole: 0.812 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-053-8994, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7529133
NSN: 5340-00-053-8994
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER CUSHION
overall_width1.000 INCHES NOMINAL IN
style_designatorSINGLE LOOP
loop_inside_diameter0.375 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end1.374 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.812 INCHES NOMINAL IN
NSN5340-00-053-8994
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7529133 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC CUSHION
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.969 INCHES NOMINAL IN
•
DIAMETER: 0.406 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.281 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
LOOP INSIDE DIAMETER: 0.750 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC AND CHROMATE BAND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC CUSHION
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.969 INCHES NOMINAL IN
DIAMETER0.406 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.281 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
LOOP INSIDE DIAMETER0.750 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC AND CHROMATE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONAISI C1005 THRU C1020 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 1006 THRU 1020 ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIALSTEEL BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
7373381Upgraded Successor
successor cross-reference
successor
7529133Upgraded Successor
successor cross-reference
successor
7529133-4Upgraded Successor
successor cross-reference
successor
7373360Upgraded Successor
successor cross-reference
successor
7397782Upgraded Successor
successor cross-reference
successor
5340011681528Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7529133?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7529133?
7529133 is a CLAMP,LOOP.
What parts can replace 7529133?
There are 17 known substitutes for 7529133: 7373381, 7529133, 7529133-4 and 14 more. Substitute compatibility should be verified for your specific system.
Is 7529133 still available?
7529133 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7529133

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026