PartsTable
Technical Data Sheet
Download PDF

752668 — CONNECTOR,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

752668: CONNECTOR,ROD END.

The CONNECTOR,ROD END is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 464 OR COPPER ALLOY 482 OVERALL, thread_length: 0.500 INCHES NOMINAL ROD CONNECTION IN, thread_direction: RIGHT-HAND ROD CONNECTION, nominal_thread_size: 0.219 INCHES ROD CONNECTION IN, body_overall_diameter: 0.313 INCHES NOMINAL IN, thread_quantity_per_inch: 28 ROD CONNECTION. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-334-8228, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
752668
NSN: 5340-00-334-8228
FSC: 5340 — Hardware, Commercial
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialCOPPER ALLOY 464 OR COPPER ALLOY 482 OVERALL
thread_length0.500 INCHES NOMINAL ROD CONNECTION IN
thread_directionRIGHT-HAND ROD CONNECTION
nominal_thread_size0.219 INCHES ROD CONNECTION IN
body_overall_diameter0.313 INCHES NOMINAL IN
thread_quantity_per_inch28 ROD CONNECTION
thread_series_designatorUNS ROD CONNECTION
rod_connection_end_length0.782 INCHES NOMINAL IN
securing_pin_hole_diameter0.059 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
distance_from_end_to_hole_center1.031 INCHES NOMINAL IN
material_document_and_classificationSAE J461,CA464 ASSN STD 1ST MATERIAL RESPONSE OR QQ-B-637,ALLOY 482 1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL
distance_from_pivot_pinhole_center_to_tongue_end0.157 INCHES NOMINAL IN
NSN5340-00-334-8228
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 752668 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECURING PIN HOLE DIAMETER: 0.059 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.500 INCHES NOMINAL ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J461,CA464 ASSN STD 1ST MATERIAL RESPONSE OR QQ-B-637,ALLOY 482 1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.219 INCHES ROD CONNECTION IN
•
ROD CONNECTION END LENGTH: 0.782 INCHES NOMINAL IN
•
DISTANCE FROM END TO HOLE CENTER: 1.031 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 28 ROD CONNECTION
TECHNICAL CHARACTERISTICS
SECURING PIN HOLE DIAMETER0.059 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
THREAD LENGTH0.500 INCHES NOMINAL ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J461,CA464 ASSN STD 1ST MATERIAL RESPONSE OR QQ-B-637,ALLOY 482 1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.219 INCHES ROD CONNECTION IN
ROD CONNECTION END LENGTH0.782 INCHES NOMINAL IN
DISTANCE FROM END TO HOLE CENTER1.031 INCHES NOMINAL IN
THREAD QUANTITY PER INCH28 ROD CONNECTION
MATERIALCOPPER ALLOY 464 OR COPPER ALLOY 482 OVERALL
BODY OVERALL DIAMETER0.313 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 752668?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 752668?
752668 is a CONNECTOR,ROD END.
What is the NSN for 752668?
752668 is cataloged in the U.S. Government catalog under NSN 5340-00-334-8228. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 752668

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.