PartsTable
Technical Data Sheet
Download PDF

7526593 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7526593: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1008 OR STEEL COMP 1010 OVERALL, thickness: 0.029 INCHES NOMINAL IN, hole_diameter: 0.203 INCHES NOMINAL IN, overall_diameter: 0.500 INCHES NOMINAL IN, surface_treatment: ZINC OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-752-6593, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7526593
NSN: 5310-00-752-6593
FSC: 5310 — Nuts and Washers
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1008 OR STEEL COMP 1010 OVERALL
thickness0.029 INCHES NOMINAL IN
hole_diameter0.203 INCHES NOMINAL IN
overall_diameter0.500 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5310-00-752-6593
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7526593 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: ZINC OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 1008 OR STEEL COMP 1010 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.203 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTZINC OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 1008 OR STEEL COMP 1010 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.203 INCHES NOMINAL IN
THICKNESS0.029 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
118109Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1516860Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5310007526593Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7526593?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7526593?
7526593 is a WASHER,FLAT.
What parts can replace 7526593?
There are 3 known substitutes for 7526593: 118109, 1516860, 5310007526593. Substitute compatibility should be verified for your specific system.
What is the NSN for 7526593?
7526593 is cataloged in the U.S. Government catalog under NSN 5310-00-752-6593. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7526593