PartsTable
Technical Data Sheet
Download PDF

7521762 — PLUG,EXPANSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7521762: PLUG,EXPANSION.

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include height: 0.234 INCHES NOMINAL IN, material: STEEL, outside_diameter: 2.008 INCHES MINIMUM AND 2.011 INCHES MAXIMUM IN, style_designator: CUP, material_thickness: 0.062 INCHES NOMINAL IN, end_item_identification: W/S: TRUCK, CARGO, DROPSIDE 2 1/2-TON 6X6 W/E. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-752-1762, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7521762
NSN: 5340-00-752-1762
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height0.234 INCHES NOMINAL IN
materialSTEEL
outside_diameter2.008 INCHES MINIMUM AND 2.011 INCHES MAXIMUM IN
style_designatorCUP
material_thickness0.062 INCHES NOMINAL IN
end_item_identificationW/S: TRUCK, CARGO, DROPSIDE 2 1/2-TON 6X6 W/E
NSN5340-00-752-1762
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7521762 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.008 INCHES MINIMUM AND 2.011 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CUP
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
HEIGHT: 0.234 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER2.008 INCHES MINIMUM AND 2.011 INCHES MAXIMUM IN
STYLE DESIGNATORCUP
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
HEIGHT0.234 INCHES NOMINAL IN
END ITEM IDENTIFICATIONW/S: TRUCK, CARGO, DROPSIDE 2 1/2-TON 6X6 W/E
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 3
853D1Reference document
Same NSN cross-reference
Reference document — Secondary reference
913776Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340007521762Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7521762?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7521762?
7521762 is a PLUG,EXPANSION.
What parts can replace 7521762?
There are 3 known substitutes for 7521762: 853D1, 913776, 5340007521762. Substitute compatibility should be verified for your specific system.
What is the NSN for 7521762?
7521762 is cataloged in the U.S. Government catalog under NSN 5340-00-752-1762. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7521762