PartsTable
Technical Data Sheet
PartsTable / MRO / 75205
75205 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: HEXAGON, body_style: CYLINDRICAL BUSHING MOUNTED, nut_height: 0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN, body_length: 2.125 INCHES MAXIMUM IN, shaft_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-616-8660, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 75205
NSN: 5310-00-616-8660
FSC: 5310
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleHEXAGON
body_styleCYLINDRICAL BUSHING MOUNTED
nut_height0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
body_length2.125 INCHES MAXIMUM IN
shaft_styleROUND
shaft_length0.875 INCHES NOMINAL IN
thread_class3B
actuator_typeSINGLE SHAFT
body_diameter1.750 INCHES NOMINAL IN
thread_seriesUNJC
shaft_diameter0.250 INCHES NOMINAL IN
NSN5310-00-616-8660
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 75205 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD CLASS: 3B
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
THREAD QUANTITY PER INCH: 32
•
WIDTH ACROSS FLATS: 0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPASSIVATE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS3B
NOMINAL THREAD SIZE0.138 INCHES IN
END ITEM IDENTIFICATIONA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
THREAD QUANTITY PER INCH32
WIDTH ACROSS FLATS0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
THREAD SERIESUNJC
NUT HEIGHT0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
TYP300-6-32NC2BCRESInterchangeable
interchangeable cross-reference
interchangeable
263-041-1632Interchangeable
interchangeable cross-reference
interchangeable
NDC00597-0027-02Interchangeable
interchangeable cross-reference
interchangeable
SERENTIL INJETIONInterchangeable
interchangeable cross-reference
interchangeable
SERENTILInterchangeable
interchangeable cross-reference
interchangeable
2702Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 75205?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75205?
75205 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 75205?
There are 32 known substitutes for 75205: TYP300-6-32NC2BCRES, 263-041-1632, NDC00597-0027-02 and 29 more. Substitute compatibility should be verified for your specific system.
Is 75205 still available?
75205 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75205

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026