PartsTable
Technical Data Sheet
Download PDF

752-7068514-13 — PIN,QUICK RELEASE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

752-7068514-13: PIN,QUICK RELEASE.

The PIN,QUICK RELEASE is a the manufacturer industrial component. Key specifications include material: STEEL HEAD, grip_length: 2.000 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN, head_diameter: 0.688 INCHES NOMINAL IN, actuation_type: PULL, shank_diameter: 0.5575 INCHES MINIMUM AND 0.5605 INCHES MAXIMUM IN, actuation_method: HANDLE. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-494-4767, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
752-7068514-13
NSN: 5315-01-494-4767
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL HEAD
grip_length2.000 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN
head_diameter0.688 INCHES NOMINAL IN
actuation_typePULL
shank_diameter0.5575 INCHES MINIMUM AND 0.5605 INCHES MAXIMUM IN
detent_quantity2
actuation_methodHANDLE
style_designatorRING HANDLE
pin_attachment_typeRING
ring_handle_diameter1.687 INCHES NOMINAL IN
shoulder_to_head_end_distance0.562 INCHES NOMINAL IN
detent_to_tapered_end_distance0.593 INCHES NOMINAL IN
NSN5315-01-494-4767
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 752-7068514-13 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.5575 INCHES MINIMUM AND 0.5605 INCHES MAXIMUM IN
•
ACTUATION METHOD: HANDLE
•
DETENT TO TAPERED END DISTANCE: 0.593 INCHES NOMINAL IN
•
DETENT QUANTITY: 2
•
ACTUATION TYPE: PULL
•
PIN ATTACHMENT TYPE: RING
•
STYLE DESIGNATOR: RING HANDLE
•
GRIP LENGTH: 2.000 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.5575 INCHES MINIMUM AND 0.5605 INCHES MAXIMUM IN
ACTUATION METHODHANDLE
DETENT TO TAPERED END DISTANCE0.593 INCHES NOMINAL IN
DETENT QUANTITY2
ACTUATION TYPEPULL
PIN ATTACHMENT TYPERING
STYLE DESIGNATORRING HANDLE
GRIP LENGTH2.000 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN
RING HANDLE DIAMETER1.687 INCHES NOMINAL IN
MATERIALSTEEL HEAD
SUBSTITUTES & CROSS-REFERENCES 2
7068514Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
H832-1695-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 752-7068514-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 752-7068514-13?
752-7068514-13 is a PIN,QUICK RELEASE.
What parts can replace 752-7068514-13?
There are 2 known substitutes for 752-7068514-13: 7068514, H832-1695-13. Substitute compatibility should be verified for your specific system.
What is the NSN for 752-7068514-13?
752-7068514-13 is cataloged in the U.S. Government catalog under NSN 5315-01-494-4767. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 752-7068514-13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.