PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 752-7068514
752-7068514 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, fork_depth: 1.375 INCHES NOMINAL IN, hole_shape: ROUND, fork_span_width: 0.500 INCHES NOMINAL IN, overall_diameter: 1.563 INCHES NOMINAL IN, style_designator: CLEVIS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-494-3922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
752-7068514
NSN: 5340-01-494-3922
FSC: 5340
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
fork_depth1.375 INCHES NOMINAL IN
hole_shapeROUND
fork_span_width0.500 INCHES NOMINAL IN
overall_diameter1.563 INCHES NOMINAL IN
style_designatorCLEVIS
NSN5340-01-494-3922
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 752-7068514 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK DEPTH: 1.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL: STEEL COMP 316 OVERALL
•
OVERALL DIAMETER: 1.563 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.500 INCHES NOMINAL IN
•
HOLE SHAPE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
FORK DEPTH1.375 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIALSTEEL COMP 316 OVERALL
OVERALL DIAMETER1.563 INCHES NOMINAL IN
FORK SPAN WIDTH0.500 INCHES NOMINAL IN
HOLE SHAPEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
TR-14Interchangeable
interchangeable cross-reference
interchangeable
T1184-66Interchangeable
interchangeable cross-reference
interchangeable
TL102Interchangeable
interchangeable cross-reference
interchangeable
MIL-T-81772 TY1Interchangeable
interchangeable cross-reference
interchangeable
8010PL1774563Interchangeable
interchangeable cross-reference
interchangeable
IS-143Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 752-7068514?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 752-7068514?
752-7068514 is a CLEVIS,ROD END.
What parts can replace 752-7068514?
There are 7 known substitutes for 752-7068514: TR-14, T1184-66, TL102 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 752-7068514?
752-7068514 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-494-3922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 752-7068514

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026