PartsTable
Technical Data Sheet
Download PDF

752-7068482-29 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

752-7068482-29: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, shank_length: 0.410 INCHES NOMINAL IN, overall_length: 2.120 INCHES NOMINAL IN, shank_diameter: 0.7493 INCHES MINIMUM AND 0.7497 INCHES MAXIMUM IN, undercut_width: 0.190 INCHES NOMINAL IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-499-8475, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
752-7068482-29
NSN: 5315-01-499-8475
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
shank_length0.410 INCHES NOMINAL IN
overall_length2.120 INCHES NOMINAL IN
shank_diameter0.7493 INCHES MINIMUM AND 0.7497 INCHES MAXIMUM IN
undercut_width0.190 INCHES NOMINAL IN
first_end_styleCHAMFERED
second_end_styleSQUARE
style_designatorUNDERCUT
shoulder_diameter0.7493 INCHES MINIMUM AND 0.7497 INCHES MAXIMUM IN
undercut_diameter0.490 INCHES NOMINAL IN
first_end_locationCHAMFERED END
first_end_taper_angle45.0 DEGREES NOMINAL
NSN5315-01-499-8475
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 752-7068482-29 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.7493 INCHES MINIMUM AND 0.7497 INCHES MAXIMUM IN
•
UNDERCUT WIDTH: 0.190 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.030 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.490 INCHES NOMINAL IN
•
FIRST END LOCATION: CHAMFERED END
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 0.410 INCHES NOMINAL IN
•
STYLE DESIGNATOR: UNDERCUT
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.7493 INCHES MINIMUM AND 0.7497 INCHES MAXIMUM IN
UNDERCUT WIDTH0.190 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.030 INCHES NOMINAL IN
UNDERCUT DIAMETER0.490 INCHES NOMINAL IN
FIRST END LOCATIONCHAMFERED END
FIRST END STYLECHAMFERED
SHANK LENGTH0.410 INCHES NOMINAL IN
STYLE DESIGNATORUNDERCUT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.120 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 752-7068482-29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 752-7068482-29?
752-7068482-29 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 752-7068482-29?
752-7068482-29 is cataloged in the U.S. Government catalog under NSN 5315-01-499-8475. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 752-7068482-29

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.