PartsTable
Technical Data Sheet
Download PDF

752-7068454-08 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

752-7068454-08: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include diameter: 1.495 INCHES MINIMUM AND 1.497 INCHES MAXIMUM IN, material: STEEL COMP 630 OVERALL, head_style: SQUARE COUNTERSUNK, head_width: 1.870 INCHES MINIMUM AND 1.890 INCHES MAXIMUM IN, chamfer_length: 0.040 INCHES NOMINAL IN, special_features: COUNTERSUNK HEAD 0.280 DIA AND .250-20-UNC-2B FULL THREAD;AGE HARDENED MATERIAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-481-9599, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
752-7068454-08
NSN: 5315-01-481-9599
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
diameter1.495 INCHES MINIMUM AND 1.497 INCHES MAXIMUM IN
materialSTEEL COMP 630 OVERALL
head_styleSQUARE COUNTERSUNK
head_width1.870 INCHES MINIMUM AND 1.890 INCHES MAXIMUM IN
chamfer_length0.040 INCHES NOMINAL IN
special_featuresCOUNTERSUNK HEAD 0.280 DIA AND .250-20-UNC-2B FULL THREAD;AGE HARDENED MATERIAL
style_designatorSTRAIGHT
pin_chamfer_angle45.0 DEGREES NOMINAL
under_head_length2.880 INCHES NOMINAL IN
head_countersink_angle90.0 DEGREES NOMINAL
material_document_and_classificationASTM-A-564 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyHINGE PIN
NSN5315-01-481-9599
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 752-7068454-08 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.040 INCHES NOMINAL IN
•
HEAD WIDTH: 1.870 INCHES MINIMUM AND 1.890 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 2.880 INCHES NOMINAL IN
•
HEAD COUNTERSINK ANGLE: 90.0 DEGREES NOMINAL
•
PIN CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
STYLE DESIGNATOR: STRAIGHT
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM-A-564 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 1.495 INCHES MINIMUM AND 1.497 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.040 INCHES NOMINAL IN
HEAD WIDTH1.870 INCHES MINIMUM AND 1.890 INCHES MAXIMUM IN
UNDER HEAD LENGTH2.880 INCHES NOMINAL IN
HEAD COUNTERSINK ANGLE90.0 DEGREES NOMINAL
PIN CHAMFER ANGLE45.0 DEGREES NOMINAL
STYLE DESIGNATORSTRAIGHT
MATERIAL DOCUMENT AND CLASSIFICATIONASTM-A-564 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER1.495 INCHES MINIMUM AND 1.497 INCHES MAXIMUM IN
HEAD STYLESQUARE COUNTERSUNK
SPECIAL FEATURESCOUNTERSUNK HEAD 0.280 DIA AND .250-20-UNC-2B FULL THREAD;AGE HARDENED MATERIAL
SUBSTITUTES & CROSS-REFERENCES 1
752-7068454Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 752-7068454-08?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 752-7068454-08?
752-7068454-08 is a PIN,STRAIGHT,HEADED.
What parts can replace 752-7068454-08?
There is 1 known substitute for 752-7068454-08: 752-7068454. Substitute compatibility should be verified for your specific system.
What is the NSN for 752-7068454-08?
752-7068454-08 is cataloged in the U.S. Government catalog under NSN 5315-01-481-9599. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 752-7068454-08

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.