752-6406842-19: SPACER,PLATE.
The SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL UNS K02102, hole_diameter: 0.529 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN, overall_width: 5.130 INCHES NOMINAL IN, overall_length: 9.880 INCHES NOMINAL IN, style_designator: NON-CIRCULAR W/BOLT HOLES, aperture_diameter: 3.625 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5365-01-451-8711, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL UNS K02102 |
| hole_diameter | 0.529 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN |
| overall_width | 5.130 INCHES NOMINAL IN |
| overall_length | 9.880 INCHES NOMINAL IN |
| style_designator | NON-CIRCULAR W/BOLT HOLES |
| aperture_diameter | 3.625 INCHES NOMINAL IN |
| overall_thickness | 0.190 INCHES NOMINAL IN |
| bolt_hole_quantity | 4 |
| material_document_and_classification | MIL-S-22698,GR A MIL SPEC SINGLE MATERIAL RESPONSE |
| outside_edge_to_bolt_hole_center_distance_along_width | 0.500 INCHES NOMINAL IN |
| outside_edge_to_bolt_hole_center_distance_along_length | 0.500 INCHES NOMINAL IN |
| center_to_center_distance_between_bolt_holes_along_width | 4.125 INCHES NOMINAL IN |
| NSN | 5365-01-451-8711 |
| OVERALL THICKNESS | 0.190 INCHES NOMINAL IN |
| STYLE DESIGNATOR | NON-CIRCULAR W/BOLT HOLES |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22698,GR A MIL SPEC SINGLE MATERIAL RESPONSE |
| OVERALL LENGTH | 9.880 INCHES NOMINAL IN |
| OVERALL WIDTH | 5.130 INCHES NOMINAL IN |
| APERTURE DIAMETER | 3.625 INCHES NOMINAL IN |
| BOLT HOLE QUANTITY | 4 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 8.875 INCHES NOMINAL IN |
| SPECIAL FEATURES | APERTURE IS OFF CENTER WITH NOMINAL DISTANCE OF 2.094 IN. FROM APERTURE CENTER TO OUTSIDE EDGE ALONG LENGTH AND NOMINAL DISTANCE OF 2.125 IN. FROM APERTURE CENTER TO OUTSIDE EDGE ALONG WIDTH; SPACER PLATE HAS TWO ADDITIONAL BOLT HOLES WITH MINIMUM DIAMETER OF 0.461 IN. AND MAXIMUM DIAMETER OF 0.481 IN.; EACH BOLT HOLE IS ON OPPOSING SIDES OF OVERALL LENGTH AND OVERALL WIDTH OF SPACER PLATE; EACH BOLT HOLE HAS NOMINAL DISTANCE OF 0.500 IN. FROM BOLT HOLE CENTER TO OUTSIDE EDGE ALONG LENGTH AND NOMINAL DISTANCE OF 1.500 IN. FROM BOLT HOLE CENTER TO OUTSIDE EDGE ALONG WIDTH IN |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 4.125 INCHES NOMINAL IN |