PartsTable
Technical Data Sheet
Download PDF

752-6406835-8 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

752-6406835-8: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 BODY, thickness: 0.216 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN, hole_diameter: 0.563 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN, overall_diameter: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-418-7933, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
752-6406835-8
NSN: 5310-01-418-7933
FSC: 5310 — Nuts and Washers
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 1018 BODY
thickness0.216 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
hole_diameter0.563 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
overall_diameter0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
inside_left_corner_chamfer_angle45.0 DEGREES NOMINAL
inside_right_corner_chamfer_angle45.0 DEGREES NOMINAL
material_document_and_classificationASTM A108 ASSN STD SINGLE MATERIAL RESPONSE BODY
NSN5310-01-418-7933
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 752-6406835-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
•
INSIDE RIGHT CORNER CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE BODY
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
INSIDE LEFT CORNER CHAMFER ANGLE: 45.0 DEGREES NOMINAL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 1018 BODY
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM IN
INSIDE RIGHT CORNER CHAMFER ANGLE45.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE BODY
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
INSIDE LEFT CORNER CHAMFER ANGLE45.0 DEGREES NOMINAL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 1018 BODY
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.563 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
THICKNESS0.216 INCHES MINIMUM AND 0.218 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
DF1706-425Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 752-6406835-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 752-6406835-8?
752-6406835-8 is a WASHER,FLAT.
What parts can replace 752-6406835-8?
There is 1 known substitute for 752-6406835-8: DF1706-425. Substitute compatibility should be verified for your specific system.
What is the NSN for 752-6406835-8?
752-6406835-8 is cataloged in the U.S. Government catalog under NSN 5310-01-418-7933. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 752-6406835-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.