PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 752-5759-1
752-5759-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2011 OVERALL, overall_length: 2.250 INCHES NOMINAL IN, handle_clearance: 1.250 INCHES NOMINAL IN, special_features: BLACK ANODIZE, surface_treatment: ANODIZE OVERALL, nominal_thread_size: 0.164 INCHES IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-021-3426, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
752-5759-1
NSN: 5340-00-021-3426
FSC: 5340
CAGE: 62143 — NORTHERN TELECOM INC TELECOM DISTRIBUTION DIV (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2011 OVERALL
overall_length2.250 INCHES NOMINAL IN
handle_clearance1.250 INCHES NOMINAL IN
special_featuresBLACK ANODIZE
surface_treatmentANODIZE OVERALL
nominal_thread_size0.164 INCHES IN
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
mounting_facility_quantity2
material_document_and_classificationQQ-A-225/3,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length2.000 INCHES NOMINAL IN
NSN5340-00-021-3426
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 752-5759-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL: ALUMINUM ALLOY 2011 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/3,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 2.000 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 2
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESBLACK ANODIZE
SURFACE TREATMENTANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2011 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/3,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH2.000 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HANDLE CLEARANCE1.250 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.164 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
MT1174ARN30AInterchangeable
interchangeable cross-reference
interchangeable
M10Interchangeable
Ink-M10
interchangeable
12901Interchangeable
interchangeable cross-reference
interchangeable
014-0008-51-4Interchangeable
interchangeable cross-reference
interchangeable
18-1901-15Interchangeable
interchangeable cross-reference
interchangeable
886-245441X-00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 752-5759-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 752-5759-1?
752-5759-1 is a HANDLE,BOW.
What parts can replace 752-5759-1?
There are 16 known substitutes for 752-5759-1: MT1174ARN30A, M10, 12901 and 13 more. Substitute compatibility should be verified for your specific system.
Is 752-5759-1 still available?
752-5759-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 752-5759-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026