PartsTable
Technical Data Sheet
Download PDF

751718-1-1 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

751718-1-1: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_width: 2.050 INCHES NOMINAL IN, first_leg_length: 1.420 INCHES NOMINAL IN, second_leg_width: 2.050 INCHES NOMINAL IN, style_designator: ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-209-9487, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
751718-1-1
NSN: 5340-01-209-9487
FSC: 5340 — Hardware, Commercial
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
first_leg_angle90.0 DEGREES NOMINAL
first_leg_width2.050 INCHES NOMINAL IN
first_leg_length1.420 INCHES NOMINAL IN
second_leg_width2.050 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.920 INCHES NOMINAL IN
surface_treatmentPLASTIC POLYAMIDE
mounting_hole_typePLAIN
first_leg_end_width1.070 INCHES NOMINAL IN
first_leg_thickness0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
second_leg_thickness0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
NSN5340-01-209-9487
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 751718-1-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.300 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.213 INCHES NOMINAL IN
•
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH: 1.660 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.139 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 0.594 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.161 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.300 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.213 INCHES NOMINAL IN
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH1.660 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.139 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH0.594 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.161 INCHES MINIMUM AND 0.176 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-23377 MIL SPEC SINGLE TREATMENT RESPONSE
SECOND LEG WIDTH2.050 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 751718-1-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 751718-1-1?
751718-1-1 is a BRACKET,ANGLE.
What is the NSN for 751718-1-1?
751718-1-1 is cataloged in the U.S. Government catalog under NSN 5340-01-209-9487. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 751718-1-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.