PartsTable
Technical Data Sheet
7512 ✓ Verified by PartsTable
EPOCH Games · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The M Pro Series - Floorbase OM46N-D is an optional accessory for the OMND Stand series.<br>The product adds a floorbase to the standard floormount base included and can then creates a non-movable base for the M Public Display Stand.<br>This is ideal if the M Public Display Stand should not be drilled to its position.<br><br>The M Pro Series - Floorbase OM46N-D. Designed for public use its footprint is suitable to fit most situations in public areas where safety is of highest importance. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-033-2122, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
7512
NSN: 5305-00-033-2122
FSC: 5305
CAGE: 74063 — TE CONNECTIVITY CORPORATION (USA)
SPECIFICATIONS
angle38.0 DEGREES
colorYELLOW OVERALL
diameter1.000 INCHES NOMINAL IN
materialPLASTIC POLYESTER OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
nut_styleEYE
nut_width2.000 INCHES NOMINAL IN
bore_shapeSTRAIGHT
case_styleSQUARE
head_styleBINDING
hole_width1.250 INCHES NOMINAL IN
seal_width0.875 INCHES NOMINAL IN
NSN5305-00-033-2122
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 7512 · EPOCH Games ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE
THREAD QUANTITY PER INCH: 20
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
HEAD HEIGHT: 0.062 INCHES NOMINAL IN
THREAD DIRECTION: RIGHT-HAND
FASTENER LENGTH: 0.312 INCHES NOMINAL IN
HEAD DIAMETER: 0.438 INCHES NOMINAL IN
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE
THREAD QUANTITY PER INCH20
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD HEIGHT0.062 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.312 INCHES NOMINAL IN
HEAD DIAMETER0.438 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SCREW MATERIALSTEEL COMP 1010
THREAD LENGTH0.312 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES

No verified substitutes available.

LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7512?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7512?
7512 is a TAPE,INSULATION,ELECTRICAL manufactured by EPOCH Games.
What is the NSN for 7512?
7512 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-033-2122. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7512