PartsTable
Technical Data Sheet
75119 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LOCKING DEVICE,CIRCUIT BREAKER is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, leg_length: 2.500 INCHES NOMINAL ALL ENDS IN, connection_type: UNTHREADED EXTERNAL HOSE ALL ENDS, connection_style: BARBED OR BEADED (HOSE) ALL ENDS, special_features: LEG LENGTHS AND OVERALL LENGTH CAN BE COMPROMISED, nominal_inside_diameter_hose_accommodated: 0.750 INCHES ALL ENDS IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-013-1374, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75119
NSN: 5330-01-013-1374
FSC: 5330
CAGE: 95097 — LITTLE GIANT CRANE AND SHOVEL INC (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
leg_length2.500 INCHES NOMINAL ALL ENDS IN
connection_typeUNTHREADED EXTERNAL HOSE ALL ENDS
connection_styleBARBED OR BEADED (HOSE) ALL ENDS
special_featuresLEG LENGTHS AND OVERALL LENGTH CAN BE COMPROMISED
nominal_inside_diameter_hose_accommodated0.750 INCHES ALL ENDS IN
NSN5330-01-013-1374
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 75119 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
DOCUMENT SOURCE: 12691
USAGE LOCATION: CONUS
DOCUMENT TYPE: INDUSTRIAL DRAWING
DOCUMENT IDENTIFICATION: T2-271
COMPONENT DOCUMENT ORIGIN: INDUSTRIAL
TECHNICAL CHARACTERISTICS (FLIS)
DOCUMENT SOURCE12691
USAGE LOCATIONCONUS
DOCUMENT TYPEINDUSTRIAL DRAWING
DOCUMENT IDENTIFICATIONT2-271
COMPONENT DOCUMENT ORIGININDUSTRIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
75119Interchangeable
interchangeable cross-reference
interchangeable
7119Interchangeable
interchangeable cross-reference
interchangeable
20111007Interchangeable
interchangeable cross-reference
interchangeable
710B0800Interchangeable
interchangeable cross-reference
interchangeable
T2-271Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 75119?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75119?
75119 is a LOCKING DEVICE,CIRCUIT BREAKER.
What parts can replace 75119?
There are 5 known substitutes for 75119: 75119, 7119, 20111007 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 75119?
75119 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-013-1374. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75119