PartsTable
Technical Data Sheet
Download PDF

751-7072202-13 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

751-7072202-13: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 FASTENER, head_style: FLAT CHAMFER, head_height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, thread_length: 0.887 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-412-4896, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
751-7072202-13
NSN: 5305-01-412-4896
FSC: 5305 — Screws
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialNICKEL ALLOY 400 FASTENER
head_styleFLAT CHAMFER
head_height0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_length0.887 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
fastener_length0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
locking_featurePATCH OR PELLET OR STRIP THREADS
thread_directionRIGHT-HAND
width_across_flats0.156 INCHES NOMINAL IN
internal_drive_styleHEXAGON
nominal_thread_diameter0.190 INCHES IN
NSN5305-01-412-4896
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 751-7072202-13 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.887 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 CL A FED SPEC SINGLE MATERIAL RESPONSE FASTENER
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.156 INCHES NOMINAL IN
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
FASTENER LENGTH0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
THREAD LENGTH0.887 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281 CL A FED SPEC SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA6 TYPE
LOCKING FEATUREPATCH OR PELLET OR STRIP THREADS
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 3
211052741Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
0.190-24UNRC-3AX1.000 NICUReference document
Same NSN cross-reference
Reference document — Design control — primary reference
FF-S-86Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 751-7072202-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 751-7072202-13?
751-7072202-13 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 751-7072202-13?
There are 3 known substitutes for 751-7072202-13: 211052741, 0.190-24UNRC-3AX1.000 NICU, FF-S-86. Substitute compatibility should be verified for your specific system.
What is the NSN for 751-7072202-13?
751-7072202-13 is cataloged in the U.S. Government catalog under NSN 5305-01-412-4896. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 751-7072202-13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.