PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7506770P2
7506770P2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, hole_diameter: 0.125 INCHES NOMINAL IN, overall_height: 0.766 INCHES NOMINAL IN, special_features: 5/16 IN. DIA OF RECESS,1/4 IN.

DEPTH OF RECESS IN, style_designator: ROUND TOP FLANGE RECESSED SHANK, outside/top_flange_diameter: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-4077, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7506770P2
NSN: 5340-00-286-4077
FSC: 5340
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
hole_diameter0.125 INCHES NOMINAL IN
overall_height0.766 INCHES NOMINAL IN
special_features5/16 IN. DIA OF RECESS,1/4 IN. DEPTH OF RECESS IN
style_designatorROUND TOP FLANGE RECESSED SHANK
outside/top_flange_diameter0.750 INCHES NOMINAL IN
NSN5340-00-286-4077
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7506770P2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: ROUND TOP FLANGE RECESSED SHANK
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE/TOP FLANGE DIAMETER: 0.750 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORROUND TOP FLANGE RECESSED SHANK
MATERIALRUBBER SYNTHETIC
OUTSIDE/TOP FLANGE DIAMETER0.750 INCHES NOMINAL IN
HOLE DIAMETER0.125 INCHES NOMINAL IN
OVERALL HEIGHT0.766 INCHES NOMINAL IN
SPECIAL FEATURES5/16 IN. DIA OF RECESS,1/4 IN. DEPTH OF RECESS IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
SUPER BONDER 414Interchangeable
interchangeable cross-reference
interchangeable
PERMABOND 792Interchangeable
interchangeable cross-reference
interchangeable
8040PL0666026Interchangeable
interchangeable cross-reference
interchangeable
1743Interchangeable
interchangeable cross-reference
interchangeable
1743BInterchangeable
interchangeable cross-reference
interchangeable
515Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7506770P2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7506770P2?
7506770P2 is a BUMPER.
What parts can replace 7506770P2?
There are 18 known substitutes for 7506770P2: SUPER BONDER 414, PERMABOND 792, 8040PL0666026 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7506770P2?
7506770P2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-4077. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7506770P2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026