PartsTable
Technical Data Sheet
Download PDF

75063-4-7 — BOLT,SHEAR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

75063-4-7: BOLT,SHEAR.

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, head_style: DOUBLE HEXAGON W/HOLE, grip_length: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, head_height: 0.224 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-826-5694, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
75063-4-7
NSN: 5340-00-826-5694
NIINs: 008265694, 016543461
FSC: 5340 — Hardware, Commercial
CAGE: 05228 — PTI TECHNOLOGIES INC. (USA)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
head_styleDOUBLE HEXAGON W/HOLE
grip_length0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
head_height0.224 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_length0.500 INCHES NOMINAL IN
fastener_length0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.312 INCHES NOMINAL IN
end_item_identificationB1-BACFT
NSN5340-00-826-5694
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 75063-4-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 0.984 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 0.656 INCHES NOMINAL IN
•
OPEN END INSIDE DIAMETER: 1.040 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER0.984 INCHES NOMINAL IN
LENGTH UNDER SHOULDER0.656 INCHES NOMINAL IN
OPEN END INSIDE DIAMETER1.040 INCHES NOMINAL IN
MATERIALPLASTIC
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 75063-4-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75063-4-7?
75063-4-7 is a BOLT,SHEAR.
What is the NSN for 75063-4-7?
75063-4-7 is cataloged in the U.S. Government catalog under NSN 5340-00-826-5694. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75063-4-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.