PartsTable
Technical Data Sheet
Download PDF

750504 — ELECTRONIC MODULE,STANDARDIZED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

750504: ELECTRONIC MODULE,STANDARDIZED.

The ELECTRONIC MODULE,STANDARDIZED is a the manufacturer industrial component. Key specifications include height: 0.578 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN, overall_width: 64.0 MILLIMETERS NOMINAL MM, cooling_method: AIR, inclosure_type: ENCASED, opening_length: 0.375 INCHES NOMINAL IN, overall_height: 12.0 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-278-0213, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
750504
NSN: 5340-00-278-0213
NIINs: 002780213, 013245191, 015195330
FSC: 5340 — Hardware, Commercial
CAGE: 57733 — STEWART-WARNER CORPORATION (USA)
SPECIFICATIONS
height0.578 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
overall_width64.0 MILLIMETERS NOMINAL MM
cooling_methodAIR
inclosure_typeENCASED
opening_length0.375 INCHES NOMINAL IN
overall_height12.0 MILLIMETERS NOMINAL MM
overall_length100.0 MILLIMETERS NOMINAL MM
basic_shape_styleRECTANGULAR OR SQUARE
cylinder_quantity1
mounting_facilityUNTHREADED HOLE(S)
brake_power_rating3.5 HORSEPOWER
cylinder_arrangementVERTICAL SINGLE CYLINDER
NSN5340-00-278-0213
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 750504 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING LENGTH: 0.375 INCHES NOMINAL IN
•
FIRST SURFACE HOLE SIZE: 0.218 INCHES NOMINAL IN
•
HEIGHT: 0.578 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
•
FIRST SURFACE HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
OPENING LENGTH0.375 INCHES NOMINAL IN
OVERALL LENGTH1.922 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
OVERALL WIDTH0.859 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
FIRST SURFACE HOLE SIZE0.218 INCHES NOMINAL IN
HEIGHT0.578 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
MOUNTING FACILITYUNTHREADED HOLE(S)
FIRST SURFACE HOLE QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 1
7539218Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 750504?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 750504?
750504 is a ELECTRONIC MODULE,STANDARDIZED.
What parts can replace 750504?
There is 1 known substitute for 750504: 7539218. Substitute compatibility should be verified for your specific system.
What is the NSN for 750504?
750504 is cataloged in the U.S. Government catalog under NSN 5340-00-278-0213. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 750504