PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7504T1C
7504T1C ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.7874 INCHES NOMINAL IN, overall_width: 0.5512 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-529-9143, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7504T1C
NSN: 3110-00-529-9143
FSC: 3110
CAGE: 28873 — ITW FOOD EQUIPMENT GROUP LLC DBA HOBART SERVICE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.7874 INCHES NOMINAL IN
overall_width0.5512 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter1.8504 INCHES NOMINAL IN
internal_fit-up_designationTIGHT
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-529-9143
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7504T1C · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: TIGHT
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
BORE DIAMETER: 0.7874 INCHES NOMINAL IN
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONTIGHT
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
BORE DIAMETER0.7874 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SHIELD QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
1273Interchangeable
interchangeable cross-reference
interchangeable
52430Interchangeable
interchangeable cross-reference
interchangeable
20BC02PInterchangeable
interchangeable cross-reference
interchangeable
30BC02XPInterchangeable
interchangeable cross-reference
interchangeable
CFN70260Interchangeable
interchangeable cross-reference
interchangeable
BB206Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7504T1C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7504T1C?
7504T1C is a BEARING,BALL,ANNULAR.
What parts can replace 7504T1C?
There are 28 known substitutes for 7504T1C: 1273, 52430, 20BC02P and 25 more. Substitute compatibility should be verified for your specific system.
Is 7504T1C still available?
7504T1C is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7504T1C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026