PartsTable
Technical Data Sheet
Download PDF

750244-7 — GASKET,SPIRAL WOUND

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

750244-7: GASKET,SPIRAL WOUND.

The GASKET,SPIRAL WOUND is a the manufacturer industrial component. Key specifications include outside_diameter: 2.594 INCHES MINIMUM AND 2.656 INCHES MAXIMUM IN, special_features: CONTAINS NON-ASBESTOS MATERIALS, style_designator: CIRCULAR, aperture_diameter: 2.109 INCHES MINIMUM AND 2.141 INCHES MAXIMUM IN, cross-sectional_thickness: 0.061 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, cross-sectional_shape_style: METAL WINDING W/ SOFT FILLER. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-522-2660, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
750244-7
NSN: 5330-01-522-2660
FSC: 5330 — Packing and Gasket Materials
CAGE: 72433 — FLEXITALLIC GASKET CO INC (USA)
SPECIFICATIONS
outside_diameter2.594 INCHES MINIMUM AND 2.656 INCHES MAXIMUM IN
special_featuresCONTAINS NON-ASBESTOS MATERIALS
style_designatorCIRCULAR
aperture_diameter2.109 INCHES MINIMUM AND 2.141 INCHES MAXIMUM IN
cross-sectional_thickness0.061 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL WINDING W/ SOFT FILLER
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-522-2660
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 750244-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.061 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL WINDING W/ SOFT FILLER
•
OUTSIDE DIAMETER: 2.594 INCHES MINIMUM AND 2.656 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 2.109 INCHES MINIMUM AND 2.141 INCHES MAXIMUM IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.061 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEMETAL WINDING W/ SOFT FILLER
OUTSIDE DIAMETER2.594 INCHES MINIMUM AND 2.656 INCHES MAXIMUM IN
APERTURE DIAMETER2.109 INCHES MINIMUM AND 2.141 INCHES MAXIMUM IN
SPECIAL FEATURESCONTAINS NON-ASBESTOS MATERIALS
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
SUBSTITUTES & CROSS-REFERENCES 3
5330PL0829868Reference document
Same NSN cross-reference
Reference document — Informative reference only
625017-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
00212045Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 750244-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 750244-7?
750244-7 is a GASKET,SPIRAL WOUND.
What parts can replace 750244-7?
There are 3 known substitutes for 750244-7: 5330PL0829868, 625017-7, 00212045. Substitute compatibility should be verified for your specific system.
What is the NSN for 750244-7?
750244-7 is cataloged in the U.S. Government catalog under NSN 5330-01-522-2660. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 750244-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.