7501MSHT1K — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

7501MSHT1K: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, shaft_length: 1.000 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-012-5030, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 7501MSHT1K

NSN: 5905-00-012-5030
NIINs: 000125030, 000125032
FSC: 5905 — Resistor
CAGE: 84048 — VERNITRON CORP VRN INTERNATIONAL DIV (USA)

SPECIFICATIONS

body_style	CYLINDRICAL BUSHING MOUNTED
body_length	0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
shaft_style	ROUND, SLOTTED
shaft_length	1.000 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
body_diameter	0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
overall_length	1.516 INCHES NOMINAL IN
shaft_diameter	0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
mounting_method	LOCKING BUSHING
overall_diameter	0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
section_quantity	1
terminal_location	REAR END LOCATION NOT OTHERWISE SPECIFIED
NSN	5905-00-012-5030

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 4.00 INCH-OUNCES IN

•

BODY DIAMETER: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN

•

SCREW THREAD QUANTITY PER INCH: 32.0

•

ELECTRICAL RESISTANCE PER SECTION: 1.0 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 150.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

SHAFT DIAMETER: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN

•

FUNCTION CHARACTERISTIC PER SECTION: SINGLE SECTION LINEAR

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	4.00 INCH-OUNCES IN
BODY DIAMETER	0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
SCREW THREAD QUANTITY PER INCH	32.0
ELECTRICAL RESISTANCE PER SECTION	1.0 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
SECTION QUANTITY	1
SHAFT DIAMETER	0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
FUNCTION CHARACTERISTIC PER SECTION	SINGLE SECTION LINEAR
BODY STYLE	CYLINDRICAL BUSHING MOUNTED
FUNCTION CONFORMITY TOLERANCE PER SECTION	-1.00 TO 1.00 SINGLE SECTION

SUBSTITUTES & CROSS-REFERENCES 3

2467343-4Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2360367-4Reference document

Same NSN cross-reference

Reference document — Secondary reference

2467343PC4REVCReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 7501MSHT1K?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7501MSHT1K?

7501MSHT1K is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).

What parts can replace 7501MSHT1K?

There are 3 known substitutes for 7501MSHT1K: 2467343-4, 2360367-4, 2467343PC4REVC. Substitute compatibility should be verified for your specific system.

What is the NSN for 7501MSHT1K?

7501MSHT1K is cataloged in the U.S. Government catalog under NSN 5905-00-012-5030. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7501MSHT1K — RESISTOR,VARIABLE,WIRE WOUND,PRE

Request a Quote — 7501MSHT1K