PartsTable
Technical Data Sheet
Download PDF

750-009-10 — SPACER,SLEEVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

750-009-10: SPACER,SLEEVE.

The SPACER,SLEEVE is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, corner_shape: SQUARE INSIDE LEFT CORNER, overall_length: 0.2900 INCHES MINIMUM AND 0.3000 INCHES MAXIMUM IN, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 0.1870 INCHES MINIMUM AND 0.1970 INCHES MAXIMUM IN, body_outside_diameter: 0.3940 INCHES MINIMUM AND 0.4050 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-102-8913, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
750-009-10
NSN: 5330-00-102-8913
NIINs: 001028913, 004378802
FSC: 5330 — Packing and Gasket Materials
CAGE: 21198 — MARCH MANUFACTURING, INC (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
corner_shapeSQUARE INSIDE LEFT CORNER
overall_length0.2900 INCHES MINIMUM AND 0.3000 INCHES MAXIMUM IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter0.1870 INCHES MINIMUM AND 0.1970 INCHES MAXIMUM IN
body_outside_diameter0.3940 INCHES MINIMUM AND 0.4050 INCHES MAXIMUM IN
NSN5330-00-102-8913
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 750-009-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
•
HARDNESS RATING: 40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.182 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
HARDNESS RATING40.0 SHORE DUROMETER A MINIMUM AND 50.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.182 INCHES MINIMUM AND 0.187 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
466146Reference document
Same NSN cross-reference
Reference document — Secondary reference
182295Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 750-009-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 750-009-10?
750-009-10 is a SPACER,SLEEVE.
What parts can replace 750-009-10?
There are 2 known substitutes for 750-009-10: 466146, 182295. Substitute compatibility should be verified for your specific system.
What is the NSN for 750-009-10?
750-009-10 is cataloged in the U.S. Government catalog under NSN 5330-00-102-8913. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 750-009-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.