PartsTable
Technical Data Sheet
PartsTable / MRO / 75-1000
75-1000 ✓ Verified by PartsTable
Thule · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Robust foot for vehicles with integrated fixed points and taller roofs. Key specifications include material: STEEL COMP 303 OVERALL, body_style: CYLINDRICAL SERVO MOUNTED, head_style: HEXAGON, body_length: 1.385 INCHES MAXIMUM IN, head_height: 0.125 INCHES NOMINAL IN, shaft_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-855-2009, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 75-1000
NSN: 5305-00-855-2009
FSC: 5305
CAGE: 80249 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
body_styleCYLINDRICAL SERVO MOUNTED
head_styleHEXAGON
body_length1.385 INCHES MAXIMUM IN
head_height0.125 INCHES NOMINAL IN
shaft_styleROUND
pilot_length0.0600 INCHES NOMINAL IN
shaft_length2.625 INCHES NOMINAL IN
thread_class2A A
actuator_typeSINGLE SHAFT
body_diameter0.875 INCHES NOMINAL IN
thread_length0.500 INCHES MINIMUM IN
NSN5305-00-855-2009
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 75-1000 · Thule ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.125 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 32
•
FASTENER LENGTH: 4.785 INCHES NOMINAL IN
•
SECOND DIAMETER FROM HEAD: 0.147 INCHES NOMINAL IN
•
THREAD CLASS: 2A A
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIFTH DIAMETER: 4.285 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 303 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.125 INCHES NOMINAL IN
THREAD QUANTITY PER INCH32
FASTENER LENGTH4.785 INCHES NOMINAL IN
SECOND DIAMETER FROM HEAD0.147 INCHES NOMINAL IN
THREAD CLASS2A A
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIFTH DIAMETER4.285 INCHES NOMINAL IN
MATERIALSTEEL COMP 303 OVERALL
WIDTH BETWEEN FLATS0.438 INCHES NOMINAL IN
THREAD LENGTH0.500 INCHES MINIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
20031Interchangeable
interchangeable cross-reference
interchangeable
751000Interchangeable
interchangeable cross-reference
interchangeable
5800332-1900-001Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 75-1000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 75-1000?
75-1000 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Thule. It is classified as a MRO (MRO_GENERAL).
What parts can replace 75-1000?
There are 3 known substitutes for 75-1000: 20031, 751000, 5800332-1900-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 75-1000?
75-1000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-855-2009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 75-1000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026