PartsTable
Technical Data Sheet
Download PDF

74D291037-2061 — THUMBSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

74D291037-2061: THUMBSCREW.

The THUMBSCREW is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, head_style: KNURLED NO. 1, head_height: 0.380 INCHES NOMINAL IN, point_style: FLAT, thread_class: 3A A, head_diameter: 0.500 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-241-2641, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74D291037-2061
NSN: 5305-01-241-2641
FSC: 5305 — Screws
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
head_styleKNURLED NO. 1
head_height0.380 INCHES NOMINAL IN
point_styleFLAT
thread_class3A A
head_diameter0.500 INCHES NOMINAL IN
thread_length1.000 INCHES NOMINAL IN
fastener_length7.420 INCHES NOMINAL IN
special_featuresHOLE DRILLED IN CENTER OF HEAD 0.048 INCH MIN 0.083 INCH MAX DIA; 0.184 INCH MAX DEEP; COUNTERSUNK 60 DEG TO 0.187 INCH DIA MAX OPTIONAL IN
thread_directionRIGHT-HAND
nominal_thread_diameter0.250 INCHES IN
thread_quantity_per_inch28
NSN5305-01-241-2641
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 74D291037-2061 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.380 INCHES NOMINAL IN
•
FASTENER LENGTH: 7.420 INCHES NOMINAL IN
•
THREAD LENGTH: 1.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4640 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: KNURLED NO. 1
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: FLAT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.380 INCHES NOMINAL IN
FASTENER LENGTH7.420 INCHES NOMINAL IN
THREAD LENGTH1.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS4640 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEKNURLED NO. 1
THREAD DIRECTIONRIGHT-HAND
POINT STYLEFLAT
SPECIAL FEATURESHOLE DRILLED IN CENTER OF HEAD 0.048 INCH MIN 0.083 INCH MAX DIA; 0.184 INCH MAX DEEP; COUNTERSUNK 60 DEG TO 0.187 INCH DIA MAX OPTIONAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
SUBSTITUTES & CROSS-REFERENCES 2
PL74D291037Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
74D291037Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 74D291037-2061?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74D291037-2061?
74D291037-2061 is a THUMBSCREW.
What parts can replace 74D291037-2061?
There are 2 known substitutes for 74D291037-2061: PL74D291037, 74D291037. Substitute compatibility should be verified for your specific system.
What is the NSN for 74D291037-2061?
74D291037-2061 is cataloged in the U.S. Government catalog under NSN 5305-01-241-2641. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74D291037-2061