PartsTable
Technical Data Sheet
Download PDF

74D111292-2047 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

74D111292-2047: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4330 OVERALL, nut_style: HEXAGON, nut_height: 0.500 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-510-0494, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74D111292-2047
NSN: 5310-01-510-0494
FSC: 5310 — Nuts and Washers
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialSTEEL COMP 4330 OVERALL
nut_styleHEXAGON
nut_height0.500 INCHES NOMINAL IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
special_featuresTHREADS PER MIL-S-8879; BEARING NUMBER REFERENCE MS14101-8 AND MS14103-8; BEARING BORE REF 0.5000; NHA 74D11292 STAKING COMPONENTS - TOOL SET, BEARING INSTL AND REMOVAL
thread_directionRIGHT-HAND
width_across_flats0.750 INCHES NOMINAL IN
nominal_thread_size0.500 INCHES IN
thread_quantity_per_inch20
material_document_and_classificationAMS 6411 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-510-0494
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 74D111292-2047 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.750 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6411 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NUT HEIGHT: 0.500 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.750 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6411 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NUT HEIGHT0.500 INCHES NOMINAL IN
SPECIAL FEATURESTHREADS PER MIL-S-8879; BEARING NUMBER REFERENCE MS14101-8 AND MS14103-8; BEARING BORE REF 0.5000; NHA 74D11292 STAKING COMPONENTS - TOOL SET, BEARING INSTL AND REMOVAL
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH20
SUBSTITUTES & CROSS-REFERENCES 1
10400012Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 74D111292-2047?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74D111292-2047?
74D111292-2047 is a NUT,PLAIN,HEXAGON.
What parts can replace 74D111292-2047?
There is 1 known substitute for 74D111292-2047: 10400012. Substitute compatibility should be verified for your specific system.
What is the NSN for 74D111292-2047?
74D111292-2047 is cataloged in the U.S. Government catalog under NSN 5310-01-510-0494. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74D111292-2047