74A733006-2001 — PIN,STRAIGHT,HEADED

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

74A733006-2001: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.812 INCHES NOMINAL IN, diameter: 0.4346 INCHES MINIMUM AND 0.4356 INCHES MAXIMUM IN, material: STEEL COMP XM-13 OVERALL, head_style: FLAT CHAMFER, slot_width: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, slot_length: 0.499 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-134-5946, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

74A733006-2001

NSN: 5315-01-134-5946
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)

SPECIFICATIONS

height	0.812 INCHES NOMINAL IN
diameter	0.4346 INCHES MINIMUM AND 0.4356 INCHES MAXIMUM IN
material	STEEL COMP XM-13 OVERALL
head_style	FLAT CHAMFER
slot_width	0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
slot_length	0.499 INCHES NOMINAL IN
chamfer_length	0.060 INCHES NOMINAL IN
special_features	NOTCH IN HEAD 0.531 IN. LG AND 0.248 IN. MIN,0.2485 IN. MAX DEEP,PARALLEL WITH SLOT IN
style_designator	STRAIGHT
pin_chamfer_angle	43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
pin_head_diameter	0.622 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN
under_head_length	1.750 INCHES NOMINAL IN
NSN	5315-01-134-5946

COMPONENT DIAGRAM

KEY FEATURES

•

CHAMFER LENGTH: 0.060 INCHES NOMINAL IN

•

HOLE ARRANGEMENT STYLE: ONE END DRILLED

•

UNDER HEAD LENGTH: 1.750 INCHES NOMINAL IN

•

PIN CHAMFER ANGLE: 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM

•

FIRST HOLE DIAMETER: 0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN

•

STYLE DESIGNATOR: STRAIGHT

•

PIN HEAD DIAMETER: 0.622 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

TECHNICAL CHARACTERISTICS

CHAMFER LENGTH	0.060 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLE	ONE END DRILLED
UNDER HEAD LENGTH	1.750 INCHES NOMINAL IN
PIN CHAMFER ANGLE	43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM
FIRST HOLE DIAMETER	0.125 INCHES MINIMUM AND 0.131 INCHES MAXIMUM IN
STYLE DESIGNATOR	STRAIGHT
PIN HEAD DIAMETER	0.622 INCHES MINIMUM AND 0.623 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER	0.4346 INCHES MINIMUM AND 0.4356 INCHES MAXIMUM IN
HEAD STYLE	FLAT CHAMFER

OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602

SUBSTITUTES & CROSS-REFERENCES 2

10123102Reference document

Same NSN cross-reference

Reference document — Informative reference only

3930AS1171Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 74A733006-2001?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 74A733006-2001?

74A733006-2001 is a PIN,STRAIGHT,HEADED.

What parts can replace 74A733006-2001?

There are 2 known substitutes for 74A733006-2001: 10123102, 3930AS1171. Substitute compatibility should be verified for your specific system.

What is the NSN for 74A733006-2001?

74A733006-2001 is cataloged in the U.S. Government catalog under NSN 5315-01-134-5946. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

74A733006-2001 — PIN,STRAIGHT,HEADED

Request a Quote — 74A733006-2001