PartsTable
Technical Data Sheet
Download PDF

74A620020-2001 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

74A620020-2001: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, nut_style: HEXAGON, nut_height: 0.305 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), special_features: DRILLED HOLES ANODIZED PER PS13201,TYPE 2,CLASS 1,FSCM 76301. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-132-4392, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
74A620020-2001
NSN: 5310-01-132-4392
FSC: 5310 — Nuts and Washers
CAGE: 76301 — THE BOEING COMPANY DIV DEFENSE (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
nut_styleHEXAGON
nut_height0.305 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
special_featuresDRILLED HOLES ANODIZED PER PS13201,TYPE 2,CLASS 1,FSCM 76301
thread_directionRIGHT-HAND
countersink_angle89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM BOTH ENDS
surface_treatmentENAMEL OVERALL
width_across_flats1.375 INCHES NOMINAL IN
nominal_thread_size1.125 INCHES IN
bearing_surface_typeCHAMFERED
NSN5310-01-132-4392
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 74A620020-2001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.375 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: PS13630,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6,T851 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.125 INCHES IN
•
NUT HEIGHT: 0.305 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS1.375 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONPS13630,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
HOLE CONFIGURATION STYLECONFIGURATION B
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6,T851 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.125 INCHES IN
NUT HEIGHT0.305 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
DRILLED HOLE DIAMETER0.067 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
SPECIAL FEATURESDRILLED HOLES ANODIZED PER PS13201,TYPE 2,CLASS 1,FSCM 76301
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 74A620020-2001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 74A620020-2001?
74A620020-2001 is a NUT,PLAIN,HEXAGON.
What is the NSN for 74A620020-2001?
74A620020-2001 is cataloged in the U.S. Government catalog under NSN 5310-01-132-4392. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 74A620020-2001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.